Skip to content
REGAL ROOFSRoofing & waterproofing specialists
Regal Roofs crew stripping rusted sheets off an Airport Industria warehouse
Flagship service · Roof replacement & re-roofing

When Patching Stops Working, Replace It Properly.

Full roof replacements and re-sheeting for warehouses, commercial buildings, sectional-title schemes and premium homes across Cape Town. Planned, scoped and finished.

  • ✓ Industrial re-sheeting
  • ✓ Commercial overhauls
  • ✓ Heritage & premium homes
  • ✓ Written scope first
Gloved hand holding a corroded roof screw with a cracked washer
The honest answer

Not Every Roof Needs Replacing. Some Do.

Repairs make sense when the roof is sound and the problem is local. Replacement makes sense when rust, failed fixings and tired sheeting keep coming back.

We'll tell you which one you're dealing with. If a repair will do the job, we'll say so. We'd rather earn your trust than sell you a roof.

  • Rust at laps, fixings and gutters
  • Leaks in more than one place
  • Sheets lifting in the south-easter
  • Repairs every winter, getting worse
What we check before we quote

A Re-roof Starts Under the Sheets.

A new roof on a tired structure is money wasted. So we look at the whole system, not just the surface.

Structure

  • Purlins and trusses for rot, rust and sag
  • Purlin spacing against the new profile
  • Wall plates and fixings at the eaves
  • Signs of past water damage inside

Roof covering

  • Corrosion at laps, cut edges and fixings
  • Fixing type, spacing and condition
  • Sheet lift at edges, ridges and corners
  • Old skylights, vents and penetrations

Water management

  • Gutter and box gutter sizing and falls
  • Valleys, flashings and parapet details
  • Downpipe capacity and outlets
  • Ponding or overflow marks
How we re-roof

Six Details That Decide How Long a Roof Lasts.

The sheet is the easy part. The details are where 30+ years of specialist experience shows.

01 / 06

Profile for the pitch

Every profile has a minimum pitch. Put a low-rib sheet on a shallow roof and water backs up at the laps.

We match profile to pitch, span and exposure before anything is ordered.

02 / 06

Coating for the address

Coastal sites get a coating grade made for salt air. Inland industrial sites have their own needs.

Wrong coating, early rust. It's that simple.

03 / 06

Fixings and spacing

Fixing type, washer and pattern are chosen for the wind zone. Edges and corners get more, not less.

This is where cheap jobs fail in the first big south-easter.

04 / 06

Laps and sealing

Side and end laps are set to the profile and pitch, and sealed where the detail calls for it.

Done right, you never think about them again.

05 / 06

Flashings as one system

Ridges, hips, valleys, side and wall flashings are measured, cut and fitted to the new roof. Not reused, not bent to fit.

Most leaks on new roofs come from lazy flashings.

06 / 06

Clean cuts, clean site

Swarf from cutting and drilling rusts on the sheet within weeks. We sweep it off as we go.

Old sheeting is stripped and removed. You get the site back clean.

Close-up of a fixing being driven into a new charcoal roof sheet
On the roof

Every Fixing Matters.

A roof is only as good as the thousands of small decisions made on it. Fixing angle. Washer seating. Lap direction against the prevailing wind.

Our crews are trained to get these right without being watched. Then a supervisor checks anyway.

  • Fixings driven square, washers seated, not crushed
  • Laps turned away from the prevailing weather
  • Swarf cleared daily to stop rust spots
  • Supervisor checks before each section is closed
Roofing systems

The Right Material for the Building.

We work across the systems Cape Town buildings actually use. The choice depends on the structure, exposure and budget.

Corrugated metal

Heritage terraces, homes and smaller commercial roofs

Classic look. Good for re-roofing older buildings.

IBR profile

Warehouses, factories and large commercial spans

Strong, economical, quick to install over big areas.

Concealed-fix

Low-pitch commercial and architectural roofs

No exposed fixings. Cleaner lines, fewer leak points.

Clay & concrete tiles

Premium homes and sectional-title schemes

Re-tiling, re-bedding and full tile replacements.

Slate

Heritage and high-end residential

Specialist work. Careful detailing at hips and valleys.

Coating and fixing grade are chosen for each site's coastal exposure.

Who it's for

Re-roofing for Every Type of Property.

Roof bay opened above a working warehouse with a safety net below

Warehouses & factories

Phased re-sheeting so the floor keeps working underneath. Bay by bay, closed every night.

Crew re-tiling one block of a Pinelands sectional-title complex

Body corporates

Block-by-block programmes with a scope trustees can sign off and residents can understand.

Roofer laying drop sheets over a garden before roof work

Premium homes

Careful, tidy work on homes from Constantia to Camps Bay. Gardens and driveways protected.

Two roofers fitting a ridge cap on a Kalk Bay home in the wind
Keeping you running

The Building Stays Dry While We Work.

We open only what we can close the same day. Sections are stripped, re-sheeted and sealed in sequence.

We watch the forecast and plan around it. Your tenants, staff or family know what's happening and when.

  • Section-by-section sequencing
  • Weather-watched scheduling
  • One contact person on every job
  • Daily clean-up
Materials we use

Trusted Materials. Proven Performance.

Quality roofing and waterproofing starts with quality materials. We work with recognised manufacturers and suppliers to deliver reliable, long-lasting roofing solutions.

  • Safintra logo — Roof sheeting and claddingRoof sheeting and cladding
  • Pryde Trusses logo — Timber roof trussesTimber roof trusses
  • BMI Coverland logo — Concrete roof tilesConcrete roof tiles
  • Isover logo — Roof insulationRoof insulation
  • VELUX logo — Skylights and roof windowsSkylights and roof windows
  • Derbigum logo — Waterproofing systemsWaterproofing systems
How we work

Five Steps. No Surprises.

The same process on a warehouse or a family home. You always know what happens next.

  1. 01

    Enquiry

    Tell us about the building and the problem. We aim to be on site within 48 hours of your enquiry.

  2. 02

    Site inspection

    We go up and look properly. R2,200, deducted from your quote if you go ahead. Your report follows within 48 hours.

  3. 03

    Written scope

    A clear quote with the work, materials and sequence spelled out. No vague line items.

  4. 04

    Planned execution

    Work booked around your tenants, staff or family. One contact person throughout.

  5. 05

    Sign-off

    We walk the roof with you, clean up and hand over the paperwork.

Know the signs

Seven Signs Your Roof Is Done.

A roof rarely fails overnight. It tells you for years. These are the signs we look for first.

01 / 07

Corrosion through the sheet

Surface rust can be treated. Rust you can push a screwdriver through can't.

Once the steel itself is gone, coating it is just paint on a hole.

02 / 07

Leaks in more than one place

One leak is a repair. Five leaks in five places is a roof that's tired everywhere.

Chasing them one at a time costs more than replacing the lot.

03 / 07

Fixings that won't hold

Screws spinning in rotten purlins or rusted through at the head.

New screws in old holes don't grip. The sheet lifts in the next big wind.

04 / 07

Sagging or uneven lines

Dips in the roof line mean something underneath has moved.

We check purlins, trusses and battens before we quote anything.

05 / 07

Old asbestos-cement sheets

Brittle, cracked and not something to walk on or drill.

Removal has to be done by the book, with the right people and paperwork.

06 / 07

Patches on patches

Silicone, tar, paint, more silicone. Every layer is a past leak.

If the roof looks like a quilt, it's telling you something.

07 / 07

Rising insurance and tenant complaints

Tenants notice before you do. So do insurers after a claim.

A planned re-roof is easier to budget than repeat emergency call-outs.

On site now

What a Re-roof Actually Looks Like.

Strip, check, protect, rebuild. Here's the work behind the finished roof.

Two roofers fitting translucent skylight sheets on a warehouse roof

Industrial · Brackenfell

New Skylight Sheets

Old, yellowed skylights replaced in the same run as the new metal, so the building gets its daylight back.

Roofer nailing timber battens over new roof underlay

Residential · Tokai

Underlay and New Battens

Tiles off, new breathable underlay and treated battens on. The part nobody sees decides how long the roof lasts.

Crew in masks wrapping old asbestos roof sheets in plastic

Light industrial · Ottery

Old Asbestos Sheets Out

Sheets wrapped and removed carefully, with dust controlled, before the new roof goes on.

Phased replacement

How We Keep You Dry With Half the Roof Off.

Cape Town weather turns fast. We plan for it.

  1. 01

    Check the forecast

    We book the stripping days around clear weather and watch it daily.

  2. 02

    Open only what we can close

    We never strip more than we can cover the same day.

  3. 03

    Cover at night

    Anything left open gets sheeted and tied down before the crew leaves.

  4. 04

    Work in bays

    On big roofs we finish one section fully before opening the next.

  5. 05

    Protect what's below

    Stock, machines and furniture covered. Dust and debris kept out.

The difference

Same Roof. Two Very Different Jobs.

The cheap re-roof

  • New sheets screwed onto old, rotten purlins
  • Old flashings reused to save time
  • Wrong screws for coastal air
  • No underlay or insulation check
  • Leaves you with a new-looking roof that leaks

The Regal Roofs re-roof

  • Structure checked and fixed first
  • New flashings made for every junction
  • Fixings matched to the exposure
  • Underlay and insulation sorted while it's open
  • A roof built to last, with a proper handover
Common questions

Roof Replacement Questions.

Next step

Stop Paying for the Same Leak Twice.

Tell us about the building. We'll look at it properly, put the scope in writing and tell you straight what it needs.

Site inspections are R2,200, deducted from your quote if you go ahead.

Quality Workmanship. Lasting Protection. Professional Service.

CallRequest a Roofing Assessment